Sabrent Rocket Q4 SB-RKTQ4-4TB 4 TB Solid State Drive - M.2 2280 Internal - PCI Express NVMe (PCI Express NVMe 4.0 x4) SB-RKTQ4-4TB

The Sabrent 4TB Rocket Q4 NVMe PCIe 4.0 M.2 2280 Internal SSD delivers all the advantages of flash disk technology with PCIe Gen4.0 x4 interface.

Based on QLC NAND Flash memory, its performance speeds can reach up to 4900 MB/s (read) and 3500 MB/s (write) when using a PCIe Gen4 motherboard.
Using a PCIe Gen3 Motherboard Speeds will reach up to 3300 MB/s (read) and 3300 MB/s (write).
Power consumption is much lower than traditional hard drives, making it the best embedded solution for new systems.

The Sabrent 4TB Rocket Q4 NVMe PCIe 4.0 M.2 2280 Internal SSD was designed using PCIe 4.0 which allows for speeds of up to 4900 MB/s (read) and 3500 MB/s (write), significantly faster than PCIe 3.0.

Note: In order to take advantage of these speeds, a PCIe Gen4 motherboard is REQUIRED. Otherwise it will be at PCIe Gen3 speed at max of 3300MB/s.
When installing any NVMe PCIe 4.0 SSD directly onto a PCIe Gen4 Motherboard a Heatsink is required to dissipate the heat generated by the drives extreme speed levels to avoid thermal throttling and maximize performance.

The Sabrent 4TB Rocket Q4 NVMe PCIe 4.0 M.2 2280 Internal SSD is backward compatible with PCIe 3.0. Using a Gen3 PCIe motherboard will enable the user to reach speeds of up to 3300 MB/s (read) and 3300 MB/s (write).

Features:

• NVMe M.2 PCIe Gen4 x4 Interface.
• Built to the PCIe 4.0 specification / NVMe 1.3 Compliant.
• Power Management Support for APST / ASPM / L1.2.
• Supports SMART and TRIM commands.
• Supports ONFi 2.3, ONFi 3.0, ONFi 3.2 and ONFi 4.0 interface.
• Advanced Wear Leveling, Bad Block Management, Error Correction Code, and Over-Provision.
• Upgradeable Firmware.